The fridge freezer is one of the first things an inventory clerk opens, and one of the most common places an otherwise clean kitchen falls down. Ice in the freezer, a smell when the door opens or mould on the seals will all be noted. The good news is that it’s a simple job — it just can’t be done at the last minute.
Start at least 24 hours before you leave
A frosted-up freezer can take many hours to defrost fully. Start the day before your check-out at the latest, and run your food down in the week before so there’s little left to throw away.
How to defrost it properly
- Empty it completely and switch it off at the wall
- Protect the floor with towels and a tray to catch the meltwater
- Leave the doors open and let the ice melt on its own — a bowl of hot water on a shelf speeds things up
- Never chip at the ice with a knife or scraper; it’s easy to puncture the lining, and that is damage rather than dirt
- Mop up as you go so water doesn’t sit on the floor or run under the units
Cleaning the inside
- Take out the shelves, drawers and door racks and wash them in warm soapy water — let glass shelves reach room temperature first so they don’t crack
- Wipe the interior with warm water and a little washing-up liquid or bicarbonate of soda; avoid abrasive or strongly scented cleaners
- Clean the door seals carefully, including inside the folds, where mould and crumbs collect
- Clear the small drain hole at the back of the fridge compartment
- Dry everything thoroughly before putting it back
The outside and underneath
Wipe the doors, handles and top. If the appliance is freestanding and safe to move, pull it forward and clean the floor beneath it and the sides — exactly the kind of spot that gets checked on a thorough inventory.
Leave it off, dry and open
If the property is going to sit empty, a fridge that’s switched off with the door shut can turn mouldy within days. Unless your agent or landlord has asked you to leave it running, leave it switched off, completely dry and with the doors propped open.
